YourMacBookand your phone shouldn’t be in a custody battle over one plug. But that’s exactly what happens every time you travel with some sad little adapter from 2016. You plug in, power drops, things heat up, and suddenly you’re babysitting your charger more than your actual devices. It’s not just inefficient, it’s a bad look, especially when you’re multiple devices that all need juicenow.
GaN chargers fix that. They’re smaller, cooler, and way smarter about splitting power where it’s needed. Some even hit 140W without breaking a sweat, while others throw in multi-protocol support so your Android, iPhone, MacBook, and Steam Deck all feel equally loved. If you’re done with bulky bricks and adapter drama, these picks are the upgrade your gear deserves.
7Anker 737 Adapter
Anker has been the #1 pick for all things charging for a lot of people, and the 737 is a brilliant example why. This one’s got two USB-C ports and a USB-A, with 120W total to play with. Either USB-C port hits 100W if it’s the only thing plugged in, and the USB-A tops out at around 22.5W for older devices. The interesting bit happens when you start plugging in multiple things - PowerIQ 4.0 actually figures out what each device needs and moves power around accordingly.
The ActiveShield 2.0 system checks temperatures around 35 times per second,using some fancy NTC sensor setup, which probably explains why this thing never gets uncomfortably hot. At 187 grams, it’s about 39% smaller than Apple’s 96W brick, though that’s not saying much since Apple’s chargers are notoriously chunky.
They include this little silicone wall brace that stops the charger from sagging out of loose outlets, which is a nice touch. It’s not the cheapest option, but the reliability factor with Anker usually makes up for the premium.
BUY IT HERE
6UGREEN Nexode Adapter
UGREEN managed to cram 140W into a wall charger, which means you can finally ditch that massive power brick for something that doesn’t require its own luggage compartment. The port setup is two USB-C plus one USB-A. C1 handles the full 140W using PD 3.1 at 28V and 5A, while C2 tops out at 100W on PD 3.0. The USB-A does 22.5W with Quick Charge support. When you’re using multiple ports, it gets smart about power distribution - 65W + 65W for dual USB-C, or 120W + 18W if you’re mixing C1 with USB-A.
The protocol support is pretty comprehensive: PD 3.1 with EPR, PPS from 3.3-21V, Quick Charge 4/4+, Samsung PPS, and Apple’s 2.4A standard. Basically, if your device charges, this will charge it properly. UGREEN’s Thermal Guard system polls temperatures 5 times per second and starts backing off power at 85°C. That’s more aggressive monitoring than most chargers bother with, which probably explains why people don’t report overheating issues.
At 300 grams, it’s a little heftier than the 737, but also includes a 5-foot EPR cable in the bundle, which alone is worth $20-30.
5BUY IT HEREBaseus GaN5 Pro Adapter
Baseus has been quietly making decent charging gear for a while, and their GaN5 140W charger is probably their best effort yet. The headline number here is charging a MacBook Pro 16" completely in about 1 hour 20 minutes, as per their claims.
Standard port layout includes two USB-C, one USB-A - with C1 supporting PD 3.1 at 28V and 5A for the full 140W. The adapter is just 357 grams, making it one of the lighter high-wattage options. The included cable is 1 meter of EPR-rated USB-C.
.
They have also integrated something called BCT (Baseus Cooling Tech) that uses dual-sided vapor chamber heat plates so you get better distribution with heat. Brand-wise, they haven’t evolved enough to go toe-to-toe with the likes of Anker yet, but they’re steadily building a rep for themselves, and this adapter is a nice reminder of that.
4BUY IT HERESatechi 165 W Station
Satechi took a different approach here - instead of cramming everything into a wall wart, they built a proper desktop charging station. Four USB-C ports, no USB-A, with a 2-meter figure-8 cable that plugs into the wall.
The power distribution gets complex with four ports. If you’re just using one port, it’ll push 100W without breaking a sweat. Two devices plugged in gets you 100W plus 60W. Things get more interesting with three or four ports occupied - you might see 60W + 60W + 45W, or sometimes 100W + 30W + 30W, depending on what’s connected.The math works out to easily handle a MacBook Pro doing its fast-charge thing while your iPad, iPhone, and AirPods stay happy.
Inside, it uses Navitas NV6136 GaNFast chips with about 94% peak efficiency. The main body weighs 340 grams, plus they include a plastic stand for vertical orientation. However, the prongs aren’t foldable, which does put a dampener on things.
3BUY IT HERESpigen ArcStation Pro
Spigen’s entry focuses on doing two ports really well rather than cramming in extra connectors. Both USB-C ports are identical and can handle 140W solo using PD 3.1 at 28V and 5A, or 100W using PPS from 3.3-21V at 5A.
When you’re using both ports, power splits to 67W + 60W for a total of 127W. That’s actually a smart allocation - enough to fast-charge a MacBook Pro on one port while properly charging an iPad or phone on the other.
Physical dimensions are 30 × 73 × 73 mm at 325 grams with foldable US prongs, and that’s definitely on the heavy side for a wall charger. No other notable features as such, but it’s one of the more affordable 140W options, especially considering the clean power delivery and solid build quality.
2BUY IT HEREBelkin BoostCharge Pro
Belkin went with a desktop format here - no fold-out prongs, meant to sit on your desk with a 2-meter figure-8 cord, just like the Satechi. We’ve got four ports total: two USB-C with PD 3.0 and two USB-A that share 12W between them.
The total power budget is 108W with what Belkin calls “Intelligent Power Sharing,” though they don’t publish exact splits. It’s definitely got a bigger presence, and the added weight comes partly from the included 2-meter cable, but even accounting for that, it’s a large piece of hardware.
The main limitation is that 108W total ceiling. Sure, it’s enough for most setups, but if you need to charge multiple high-power devices simultaneously, you’ll hit the limit pretty quickly.
We also have the 2-year standard Belkin warranty, plus $2,500 in Connected Equipment Warranty coverage. That means if their charger somehow fries your laptop, they’ll cover repair or replacement up to $2,500. Most companies don’t put their money where their mouth is like that, so massive props to Belkin for doing this.
1Voltme Revo Adapter
VOLTME is less established than some other brands, but their Revo 140W picked up a CES 2023 Innovation Honoree award in the laptop accessory category, which means they’re doing something right.
You get the standard three-port layout with two USB-C and one USB-A, powered by GaN III technology and what they call “V-Dynamic power logic.” The dimensions work out to about 3.05 × 1.24 × 2.89 inches, weighing in at 289 grams - not bad for something pushing 140W.
They also threw in support for pretty much every charging standard you’d want: PD 3.1 EPR for the heavy lifting, Quick Charge 5 for newer Android phones, PPS that goes up to 100W, and some additional protocols like SCP and PE2.0, so your random devices charge properly. Having QC 5 and PD 3.1 in the same charger is still relatively uncommon, so points for future-proofing.
FAQ
Q: What’s the deal with EPR cables? Do I need one?
If your charger goes above 100W (especially with PD 3.1), you are definitely going to need an EPR-rated cable. Otherwise, you’re basically trying to funnel a fire hose through a straw. Most good chargers include one. If they don’t, then it means that we’re looking in the wrong place.
Q: Why do some chargers split power weirdly when multiple ports are in use?
Because there’s only so much wattage to go around. Most decent chargers use dynamic power allocation to give each device what it needs, but some ports get throttled when the others are being greedy. It’s not a bug, it’s physics.
Q: What even is GaN and why should I care?
GaN (Gallium Nitride) is a semiconductor material that’s more efficient than traditional silicon. It allows chargers to deliver higher power output in a smaller form factor, with less heat generation. This means GaN chargers can be more compact, faster, and cooler-running compared to standard silicon-based models.
